Zfx Inhouse 5x - Control manual
Message Description
100: Reference of axis is missing
100: Open machine hood for initialization.
100: Timeout CNC channel not selected in standby mode
100: Tool in spindle is invalid.
101: Timeout CNC channel not in selected standby mode
102: Timeout CNC channel not in selected manual mode
102: The collet is empty - pick tool in Mdi or in automatic mode.
103: Timeout CNC channel not in selected manual mode
103: Current tool in the collet chuck is out of tolerance, remove tool by hand and insert
104: Timeout CNC channel Is not in selected manual mode
105: Timeout CNC channel is not in selected MDI mode
106: Timeout CNC channel is not in selected reference mode
107: Timeout CNC channel is not in selected reference mode
108: Timeout CNC channel is not in selected automatic mode
109: Timeout CNC channel is not in selected automatic mode
110: Cnc could not reference the axis
110: Main channel is not in automatic mode, job can't be started.
111: New transmitter data, please open the hood.
111: Auxiliary channel is not in automatic mode, job can't be started.
112: Main channel is not in selected mode, job can't be started.
151: Closure should be taken out, but is inserted!
151: Closure should be taken out, but is still connected!
102: Undervoltage DC-intermediate circuit
102: Under voltage DC-intermediate circuit
103: Overvoltage DC-intermediate circuit
103: Over voltage DC-intermediate circuit
105: I²T-amplifier overloaded
105: I²T-amplifier overloaded
100: A axis is to be turned on, although the chuck is open!
100: Machine hood could not be locked
100: Duration for opening the hood has been exceeded
101: Duration for closing the hood has been exceeded
101: At least one function block assigned to TwinSAFE has an error
102: At least one TwinSAFE_Connection of the TwinSAFE-Group has an error
103: At least one local output assigned to the TwinSAFE group has an error
104: Spindle has not reached the target speed in the ramp-up time
105: Spindle has not reached the target rotation speed in the turn-off time
105: Timeout when restoring the image of the main channel!
106: Spindle has not reached the target speed in the modification time
107: Inverter no longer controls the spindle
200: Duration for opening the air slide has been exceeded
201: Duration for closing the air gate has been exceeded